Fire extinguishers can run near 200 Bar pressure so if your able to bounce your body weight on your track pump to get to that, you really deserve to be shot into orbit. just burst the interior diaphram and It also worked a treat,Īfter that I upped my game with a 3l fire extinguisher and tubeless presta valve with some compression BS fittings. they can run several Bar in pressure and have a shrader valve in the base. So Ive done the soda bottle option and it worked a treat, wrapped it with Gaffa tape and bound the lid too, no way that thing was blowing up with 200PSI let alone 100psi, then I replaced my old boiler with a new boiler and manufactured a pressure chamber out the exspansion bottle of the heating system. Construction is sturdy, finish is top notch, and the metal hardware and components feel like they should hold up for a number of years.
I have inflated a number of tubeless tires with the Airshot and it has yet to fail me. If you have a particularly stubborn tire or a gunked-up valve, you can remove the valve core from your tubeless valve and use the adaptor supplied, which screws into the valve itself. 130psi in the 1.15L bottle translates to 25-30psi in your tire, depending upon your tire and rim combination. is 160psi), screw in the metal valve/chuck onto your tubeless presta valve and turn the blue valve 90º to release the air twisting this valve will quickly dump a large volume of air at high speed and should promptly seat even the most tenacious tubeless tires. Once pressurized to 130psi ( recommended max. You can inflate the Airshot using any normal track pump, or even a mini-pump if necessary, but for safety reasons, a compressor is not recommended.
0 kommentar(er)
